Recent content by Messer

Just wasnt sure with it being 1.52 when set to 20k, Kevin suggested 1.52 when the meter is set to 2k.... There was a dry joint on the board which we have resoldered but to no avail. There is a small patch on the board which looks a little discoloured slightly, but its surrounded by...

I've disconnected the wires and checked the resistance, I'm getting 1.52 with my multimeter set at 20k and 1542 when its set to 2000 ohm. Does that mean anything?

Ok, so if the covers are off as i look at the boiler would it be in the bottom right corner there are two things - one has the gas pipes coming in and the other is like a cylindrical item with 2 spade connectors connected to it.. Is that what I should be testing? Cheers Tony

Ok Cheers I will have a look. Excuse my ignorance, but where is the gas control valve?

Hi, i am new to this forum and was looking for any advice really.. I have a Baxi Solo 2 40 PF boiler and recently its been acting up a bit. When its on, quite frequently you can hear a continuous electrical buzzing noise which may last for about 20 seconds or so and then stop. It sounds like...