Recent content by messina1

Gentlemen thankyou for your information and comments,I gree with the last post that that there are cowboys out there and although not myself but some family members have unfortunatly been stung.That said I have been lucky and the professionals I have dealt with have been fantastic.

Look at my original question.Does that question your professional ability?

Gentlemen,thanks for your replys and information,as I said this is not a trust issue with regards the installer its me knowing for my own piece of mind,I don't think there should be a problem with a customer knowing something about the job that he is asking to be done. I have the upmost respect...

Hi,just for my own curiosity I want to make sure whoever I get to install it knows what they are doing and also so the boiler works perfect. Thats it!

Oops,looks like I wont be able to do that!

Ok,will do thanks! Im just keen for the information before I get an installer,fitter to get a quote.cheers!

Hi all,Im thinking of installing a worchester bosch 42cdi in my kitchen on the extended side of my house.From the meter under the stairs to the position on the wall in the kitchen there is about a 2 to 2 half meter length.My question is whether the connecting pipe is ok at 22mm or should be 28mm...

Thanks for the advice,pumbcenter prices gone up with everything else,now tvs £12.85 vat included!

Thanks!The room thermostat does have a trv on the rad but this rad is always on as it is in the kitchen diner and has to basically heat the kitchen too.Having said that I have never had a problem with the thermostat not responding to the temperature and in all instances this has always been...

Gents thanks for the replys,I realise I should have gone for the more expensive better known models but I was on a budget at the time and thought these would be fine.I have checked the trvs and all the pins spring up,as you said. The trvs do not have a double headed arrow on the body but one...

Last summer I had bit of time on my hands so I decided to spend a bit of effort cleaning up my heating system.I used a sludge remover and after flushing the system out I decided to take each rad off and cleaned them with with a hose in the garden.After this I went to my local SCREWFIX and bought...