I have a customer who wants their bathroom lights on a dimmer which is giving me a challenge with the extractor.
Is there an easy solution to be able to wire in an extractor without a separate external pull switch as the dimmer drops the fan speed when operated.
I was looking at a 'Manrose...
How did you get on with the installer?
I added a number of additional fixings to part of the roof to see if that improved it. Still getting a few creaks from the area even in this cold weather so not convinced. When I walk on the areas I fixed they crack like hell. I'm now resigned to the fact...
Bit of an update, I have cut an expanding joint across the complete roof from side to side approx 30mm wide. The roof is now basically two sections, 8mtrs by 4mtrs each. I haven't got round to doing anything else such as adding additional screws across the whole area due to ongoing renovations...
Just stumbled across this post and can't believe there are so many other people with the same problem as i am having. I have just installed a GRP flat roof to my loft conversion and getting the same loud bangs through the night.
I have an OSB deck with 110mm insulation with an OSB T&G cover...