Hi ,
Part came in the week from neff £75ish .
Managed to have look today and do the swap over . E voila , piping hot again
Quite straight forward to replace, but could not of done it without you’re help , so many thanks .
I’ve run one cycle right through and no tap icon flashing .
I have...
Hi , no signs of leakage all dry as a bone .
One thing I do recall is that the bottom sprinkler spinning arm was not spinning when I opened the door when the cycle was running .
Would the faulty heater pump also give a flashing tap icon, or are they separate issues ??
I have no continuity between the 2 red pins , so the pump must be the culprit, I have posted a couple of pics to show the location of where I checked for others .
I will be ordering the part to swap out .
Thanks again
Hi
The model is s51e50x3gb/47.
I pulled it out the other day and run a cycle I can see a burst of water for a few seconds coming in on the left hand side (a clear maze of pipes , not sure of tech term ) seems to run cycle but just not getting hot.
I am going to check the pcb board next , as...
I have looked at a few more posts on the subject and I’m going to check the PCB for the faulty relay , that seems quite common, thanks again, I will post my findings
Hi , thanks for you’re swift reply , you’re completely right hence my question.
What’s the best way to check if the heater is faulty ??
I will try to look at this after the new year , don’t think I will be much use on New Year’s Day :D
Hi all ,
Happy new year !
A long time vouyer of this site and first post , so please be gentle .
My neff dishwasher has started playing up over the Christmas period !!
I have a red light flashing by the tap icon and also water is not getting hot .
So I jumped on this site for the answer...