Hi thanks both for your input, at first it does sound like the valve but someone has told me it could be the programmer as this model is notorious for faults, I have done a bit of research and alot of similar problems relate to it, I will get this replaced first as its all still under warranty...
Hi
Hope someone out there will be able to help.I Recently fitted a Honeywell Y plan pack with ST9400 programmer and V4073A mid position valve. HW and CH work fine independently the problem is when they are both on together, when HW is satisfied from cyl stat it also knocks the CH off even...
I have a combination hot cylinder the one with the copper cold feed cistern sat on top.I live in 2 storey house so I have no roofspace.The problem is I cannot have an electric shower as the mains water is poor pressure/flow rate so the other alternative is a mixer shower,as I have this type of...
Hi the main long soil stack is 4" diameter with a 3" tee off to wc this is about 12" long from where it goes into the house, there is a coupling ( I think that is what it is) on this pipe and that is where it is starting to corrode
I have a cast iron soil stack with cast iron branch to wc.I need to replace the branch with 4\\\" 110mm as it is corroding and is only 3\\\" diameter ( problems flushing big waste away) Could you tell me if I can connect a plastic branch into soil stack and if so how and how do I remove the cast...