Recent content by mike.hinson

There may also be moisture separators in the outside part of the fuel line. It may be worth bleeding these first if they have air in them. Good luck, /\/\

Hi, I was lucky and managed to unscrew the top of the tap with my bare hands! (I am still interested in the proper tool or key). Now the top is off I still cant see how to remove the cassette as it is too large to come out of the hole at the bottom. If anyone knows the answer to this...

Hi, I have a stiff mixer tap & I cant work out where to get a tool to remove the cassette. Can anyone point me to a supplier of the right sort of tools please & tell me what it is called? Or is there some other way to get the module out of this sort of tap please? Thanks, Mike

mixer tap with top removed

Problesms & Solutions

Hi, sometimes my main pump seems unable to restart part way through the cycle. I have removed all the covers & the pump has only a small degree of stiffness if I turn the impeller by hand (powered off of course). If I run the machine with the pump covers off & the door open (safety...