Recent content by mike0124

  1. M

    loop in at switches lighting circuits

    Are you just converting a normal 1 way to make the light operate from 2 switches/
  2. M

    Oven Installation

    O.k your load will be just over 16amps, i would however use 4mm with a 20amp double pole switch. If it`s just as easy to, consider a deeper back box to make terminating easier. Position it easily within arms reach incase you need to urgently isolate it but obviously not to close to be...
  3. M

    Faulty bedroom light

    Whoa back up a bit, firstly verify the new bulb is ok by putting it in another pendant, it is not uncommon to have a broken filament out of the box
  4. M

    wiring hob and hood?

    Power (watts) = Volts x Amps Amps = Power/Volts Your voltage will be 230v Use the formula to work out the amperage (load) of your appliances. The hood/fridge should be ok on the kitchen power circuit as they don`t use much juice. The washing machine, is your choice as they are more...
  5. M

    Ring or Radial differences

    Have as many sockets as you want so long as your 4mm radial is protected by a 32A breaker. It`s all about load, if you are planning on having many appliances you may want to have another circuit to spread the load.
  6. M

    wiring hob and hood?

    What is the power rating of the appliances (wattage) ?
See more
Back
Top