Recent content by mikesmorris

After much head scratching I have been able to answer my own question. For others' information. From the inside of the dishwasher there are two fixing points. the lower one covered by a grey plastic hood is an allen key fitting. the higher one further back is a large spoked disk which...

hi. need to remove matrix to clean it out, looks similar to Bosch one on one of the threads but doesn't have grey retaining clips and I can't see how to release it. top is free but held securely lower down and I am a bit stuck. Am sure there is a simple answer! help appreciated. photo...

I have answered my own question - might be helpful if anyone else experiences same thing. The little recess at the top of the door which contacts the catch on the body had some gunge in it. Cleaned it and the machine is now behaving normally - I hope!

Hello - appreciate advice! Neff Integrated DW S51E50X0GB approx 6 years old. - filters cleaned - has been working fine. Brush symbol flashes when attempting to start programme - machine is empty of water. Reset cancels symbol but attempt to start programme causes it to flash again and prog...

Thanks for that Lloyd - plan is to talk to it nicely to keep going for the winter and get the pcb changed in the spring! Thanks for yours and everyone's help. Mike

Thank you agile, lloyda and muggles for helpful input. Is the redesigned pcb the one with reference "PCB UPGRADE KIT 5111603" ?

potter ton suprima 80l 12 years old original pcb fully pumped system. Boiler temp setting just over half way. Seemingly random occasional intermittent lockout , also random occasional “knocking”. When working “normally” light sequence is as follows. Programmer on and heat called boiler...