Recent content by momoosa

Finally have the time for an update.. So I tested the Valve and that was faulty I also found that my cylinder heating element was on its way out. so made the decision to replace with a combi as I was going to replace the boiler in the near future anyway. After doing some research (Googling) i...

yup thats something I can do

I think so

No air in pump.. Just checked it

Is tank fed system so not sure how to check pressure... Do t have any dials on the boiler

I have a Baxi system boiler in my garage which is connected to the pump and tank in my airing cupboard via Hive.. It has decided to stop firing up for some reason. I have checked the hive system and everything is working fine. The thermostat is talking to the receiver in the airing cupboard...

Huge thanks guys you have just save me best part of £100 call out charge! I'll have to do a walk test but the alarm did arm once I went through the steps! I'll make a donation to a charity of your choosing

Thank you thank you thank you!!!!! It's worked

Am I doing what I have drawn?

We had a power cut... Was working perfectly fine till then... Since the power cut have had the beeping and zones 7&8 lights on when trying to set alarm... I'm sure I can try find an installation manual on web?

What does that mean? I'm no expert more importantly how

Nothing happens... But now only 7 & 8 are on red when alarm is set I follwe the attached instructions when trying to omit

Nope 7&8 light up

OK so I managed to reset the panel by pressing the tamper spring 3 times and entering code 4321.. This resets the alarm.. However when I now try to set the alarm the beeping comes back and zones 2, 7&8 light up! I tried omitting them but that doesn't work... I conducted a walk around test and...