Recent content by Monkeysheed

Hi all, I've had a garden room built and I'm currently insulating it with PIR. The roof is pitched and I'm going to insulate and line it so it is vaulted on the inside. The roof has been finished with OSB, vapour control barrier and composite tiles. It's really well done and completely...

Hi all, I've got a timber framed garden room built in the summer and I'm in the process of insulating it. It's a cold roof with composite tiles on the outside, a breathable membrane and then ply. The framing is 100mm timber so I'm planning on leaving a 50mm ventilation gap and then 50mm PIR...

On second thoughts, could I use insulated plasterboard and dot and dab this straight to the brick work?

Morning all, I'm in the middle of a kitchen renovation, the walls are down to bare brick. Three of the walls are fairly plumb and square and I'm going to batten them out and overboard to create a service void for electrical installation. The forth wall, which is the external wall had a massive...

Hi all, When I moved into my house I had a large shed built by the previous owner that was in a concrete base that he'd laid and leveled by hand. I've since taken the shed down and built a nice new garden room on the existing base. I'm looking to lay a floor consisting of something like 50mm...