Recent content by MopeyGecko

Thanks. The new sign will be an aluminium tray sign and the lead flashing will be re-nailed. It’s in decent condition and has just been folded back.

Hi all, we’ve just rented a shop that needs a bit of work to the fascia. It has been stripped back and a really old illuminated light box and the old rotten ply behind has been removed. The sign company are recommending that before they take over for the new sign, that the fascia is re-clad...

Hi all, I'm wanting to repaint some shutters but I'm unsure on the best paint for the job. They are perforated powder coated roller shutters in a dark blue but I'm wanting to go with a matt finish grey instead. It looks like they may have been overpainted with a light coat in the past so need a...

I'm hoping to wire up the fire output to trigger a door release switch. Does anybody know a suitable relay that can be used with these Accenta G4 outputs? The manual states. OUTPUTS (J3): These outputs are programmed as active low output. They are held at 13V and fall to 0V when active, it can...

Take the full length of the wall out? I was hoping to minimise disruption and the need to rebuild what has just been removed. There are no electrics in the red section but there are in the outer green parts of the wall. Hmm

I’m looking to take out an internal wall. On the attached image the wall marked in green is a block wall and is not load bearing. I would like to take out the section marked in red. My question is will the newly formed corners with the blue stud partition walls need supporting? If so what’s...