I also get an issue where the DHW preheat doesn’t work while the pump is doing it’s running on business.
This also wasn’t an issue on the old firmware.
Mine does exactly the same!
It stopped doing it when they replaced the wave and it was on firmware 02.18.02
Started playing up again as soon as the firmware updated to 02.19.01.
If I turn the temp down enough it stops running on and my hot water preheat is fine again.
I’ve had the pump...
Well... the boiler has been running fine for the last month after the WB engineer changed our wave.
After the wave was changed we were running firmware 2.18.2 and this week it has upgraded itself to 2.19.1. The pump running on issue is now back and affecting the preheating of water again...
FYI
My firmware is sitting at 02.18.02 and still running fine. I wonder if my old unit was on 02.19.01.
Time will tell.
I will mention it to the engineer on his 5th visit on Thursday when he is checking up with us.
Brett, I have suffered the exact same issue as you and have had the following work carried out to try to eliminate the problem...
Checked wave to make sure WC is off
Pump changed
PCB changed
Wiring harness changed
Diverter changed
NOT FIXED IT AFTER THESE CHANGES
And today (4thWB visit) the...
I use the wave in home presence detection with a away temp set at 19deg and a night temp of 17.5deg.
Home presence night mode comes in effect from 21:00 till 6:50 every day.
Weather compensation is not switched on.
There is no extra hardware. Just the Combi and the wave.
We have had the...
I’m having a bit of trouble with my Worcester Greenstar 29CDI weather compensation mode at the minute.
It seems to have enabled itself and I can’t turn it off! The Wave app shows it is not activated but the pump runs all day.
If I turn the temp down on the wave to say 2 deg below room temp it...