mrrusty's latest activity

  • mrrusty
    Never heard that and can't really see any logic because with a normal hinge with 3 + 2 sections on the hinge there are only ever 2...
  • mrrusty
    Looks like, with that drop outside, a conventional drain is doable. Our understairs is a very similar size and works fine.
  • mrrusty
    I agree if you can, but we don't have a section and it's difficult to envisage how that drainage is going to be routed. Rest bend...
  • mrrusty
    mrrusty replied to the thread Router to router table?.
    I have that router and it is totally unsuited to router table work. It's a 1/4" tool and doesn't have an inbuilt shaft lock. You have to...
  • mrrusty
    mrrusty replied to the thread Anyone got a collated screw gun?.
    I have one and it is definitely a very useful tool. I bought an old-model corded senco brand new cheap off fleabay for a job. Had to...
  • mrrusty
    mrrusty replied to the thread Small studio in garden.
    Maybe not, but simplysips do kits for smaller buildings which might be useful to you. The advantage of SIPs is you get both the...
  • mrrusty
    mrrusty replied to the thread Small studio in garden.
    If it helps with inspiration, here's my fairly recent build https://community.screwfix.com/threads/garden-room.256842/
  • mrrusty
    mrrusty replied to the thread Small studio in garden.
    If the base is sound and solid, you could supplement it with easypads https://easypads.co.uk/ and then build a timber sub-frame...
  • mrrusty
    Its 99% IMO going to be just condensation. Air behind furniture tends to not get replaced by ventilation. Water vapour in the room...
  • mrrusty
    That sewer pipe from the toilet might be a challenge. For an understairs emergency loo why not use a macerator - we did
  • mrrusty
    The sort of thing, when I only want a few m I make with hand planes - including my old wooden hollows and rounds, some of which were...
  • mrrusty
    mrrusty replied to the thread Lean-to roof rafter replacement.
    is I suspect the answer that 95% of people would give for a repair to a 3x3 tacked-on utility room roof.....
  • mrrusty
    mrrusty replied to the thread LVT.
    With LVT make sure you read the installation instructions from the manufacturer with regard to minimum temperature and acclimatisation...
  • mrrusty
    mrrusty replied to the thread "Stand off / "Move away" hinges.
    You could possibly adapt the hinging to use a parliament hinge, but of course the knuckle end of the hinge will be visible and sticking...
  • mrrusty
    mrrusty replied to the thread Multiple Joints.
    That's a cracking job. Well done. I'm more joiner than cabinetmaker and I admire people who get great finishes on their creations
Back
Top