Recent content by mthorniley

Worked it out. They'd linked the old expansion to the flow and used it as the new leg to the boiler

No problems, just curious. The pipework from the cylinder is still there but some is capped and the others look like they have been jointed. the main reason is that the feed from the shower comes from where the old cylinder was and runs direct to the shower whereas evey other hot tap is fed from...

I have moved into a new property and have recently pulled up the boards on the landing. The House currently has a combi boiler and has had a hot water cylinder in the past. I was wondering if anyone can provide a diagram of how the pipework is usually linked out when changing from a gravity...

Thankyou

Hi did you by any chance have a look at the diagram I posted? Thanks

I've recently moved into a new house with a worcester Bosch Greenstar R35 HE Boiler. On the moving day, the lad who owned the house found an isolating valve weeping and changed it while the system was still pressurised. I have a strange problem where the boiler shows zero pressure when cold...

Thanks Just To clarify, would this be correct? Pick up permanent live and neutral off boiler, add link between N & Ns and remove link between L & Lsthen connect to hive as you stated https://drive.google.com/file/d/0B_4Ee5EHHRU4bmJQTUczX3R2YVU/view?usp=sharing I don't need to do anything with...

That's what I've read.

That's the one. Yes

No. Don't have a tr2 fitted at the minute. Just running on timer and thermostatic valves

I have just moved into a new house that has a Worcester Bosch Greenstar R35 combi boiler. There is no thermostat at present and I wanted to wire in my British Gas Hive The boiler manual and hive manual state that only the Worcester TR2 can be used on this boiler. Does anyone have a workaround?