Recent content by mummyemmy

Problem sorted! It seems the programmer panel was most probably a second hand one, engineers at work took it apart and found that the circuit board had been tampered with. So my electrician installed a dodgy one in the first place! Bought a new one and all working just fine now!

Yes it is fed from the loft - the dreadful noise is definitelt coming from the loft

Confused.com! I do have a cold water tank in the loft.....is it possible my loo is fed from there?

So if I take the programmer panel off and take that into work and get them to test it with the multimeter I should get an answer as to whether its faulty or not? Thanks for your help I shall see what they say on Monday..... Emma

When I flush the toilet is sounds like the QE2 leaving port! The noise appears to be coming from up in the loft. We have found that the noise stops if we turn the cold tap on at the same time as flushing!! How can we solve this problem once and for all? :roll:

I have uploaded photos to see if they are of any help. I cannot find any other spur and have pressed the reset button numerous times.

If I took the front plate of the timer into work do you think one of the engineers would be able to test it to see if it's faulty or not using a mulitmeter?? This is just an idea, cos it may be cheaper for me to get a new front plate than call an engineer out for them to tell me that's what I...

Changed the 3A fuse ...nothing...

Thanks - just found a 3A fuse in airing cupboard connected to the pump. Will try replacing that and see if it sorts the problem! So if there is a fault with a different part of the central heating causing the fuse to blow will it be an elctrician or a plumber I'm best to call out!!??

Now that's where you've got me cos I don't have a clue about electrics! Can't see anything separate that may contain a fuse....

All the display and lights have vanished from the control panel. None of the buttons work. So at present we have no heating or hot water. Checked the fuse box, changed the 2032 battery within the panel itself, but still nothing. Haven't touched any wiring, but just from looking it...