Recent content by Muneer

Sorry is that the right way

Ah hmm maybe I made a mistake .. how do I fix it ? Unlearn and then remove battery and re learn and don’t change ?

fully connected via richocett and on wintex set to conf pa audible but when I press the buttons alarm doesn’t go off ... It flashes red in richocett viewer so it now pa is activated but no sound what have I done wrong

It’s fixed I sent 1 page at a time for some weird reason it wasn’t updating the panel

Shall default the panel again

Also on Onboard Digicom it says nothing fitted

Com 3 is nothing fitted

The gsm is live but it gives no ats available what does that mean ..

Done and fixed it says no ats available

Right the flash worked I have the right v5 on elite 24. Issue I have now is the following 3 messages Areas Needs Reset AB ATS PATH Fault COM2 Fault I have all my settings saved on winter but cannot connect to panel via the com ip , for reference the com IP is on COM2 and COM1 is GSM. Any...

#texecom instructions need to be more clearer lol

Confused that diagram shows it going down with the line on the left that’s how I have tried but the image from the otherngillyd suggest the other way

Just seen your image I cannot believe I have been that stupid I’ll try that in the morning and let you know

Lol that was an error but it wouldn’t let me delete it

Can it put in the wrong way ,,, the 10 pin one could I suppose ... the others can’t is that wants u mean