Recent content by Muq

Do you think I should just go ahead and replace the coil pack that was in cylinder 4, which was the original misfire code. That coil pack is now sitting in cylinder 1 so I'm just a bit confused why the scanner isn't just giving a cylinder 1 misfire (p0301) and instead is giving a random/multi...

When I take off in first gear the car shakes, usually worse with cold engine. It doesn't always do it. The service light on the dash was never there, I've had the car a few years. The OBD 2 scanner wouldn't let me erase the p0304 for some reason, but the p0304 auto disappeared and scanned no...

Hi guys. I have a Renault clio 1.4 2006. Service light flashed up so I scanned the car and it gave me a P0304. I swapped the coil pack for cylinder 4 with cylinder 1. Drove the car, scanned it and no codes came up (service light stayed on). I scanned it a few days afyer and still no codes came...

I changed the metal steering lock housing and the switch, but not the key cylinder barrel. The key was getting stuck. It turns fine now, but I'm wondering if maybe the new switch is faulty or i didn't connect something back properly. But can't see why that would cause the whole engine to shut...

So I have a weird problem on my golf 1.9 TDI 2007, when I switch the ignition on the car starts up however as soon as I let go of the key SOMETIMES the engine will shut off. Sometimes the car will stay running no problem. When the engine shuts off i have to switch ignition to on to start car...

That looks great, my bay area is much smaller but the idea is the same. I was going to do something very similar to the following, which involves drilling all the pieces into the wall and then attaching the seat top. I guess if i build it properly it could also be free standing like you say...

So I have a bay window where i want to build a seat into the bay. My house is old (United kingdom built circa 1930) and I can't for the life of me find any wall studs. It's lathe and plaster walls, I've tried a really strong magnet without luck. I pulled out a skirting board (baseboard) under...