Recent content by Nailed on

Thanks for all the responses. I think there is a blockage somewhere. After no hot water this morning, I switched the boiler from both to hot water only and managed to get it fired up. Since then I’ve had hot water and heating all day whenever called. A bit of floating debris sounds like it...

I flushed the boiler through yesterday and took the inhibitor out and piped through. This seems to have solved the problem with the gas burners not getting up to full strength and yesterday both central heating and the hot water we’re working perfectly all day. This morning, the heating has...

i didn’t keep the old one unfortunately. this is the new one fitted.

This is the replacement. Yes, only started since I replaced it.

Thanks. Is that a costly repair? I assume that’s a job for an engineer and not something that will flush through?

Yeah

Yes, fully open and the pressure is ok elsewhere. 60 is as high as the hot water will go.

This is the display. Heating is on but no hot water at all at the minute. It’s a glow worm ultra com 30cxi.

Thanks for getting back to me. The photo shows the magnetic inhibitor that I replaced, no idea who installed it but this is how I found it. I do have a combi boiler. It’s a Glow Worm. Probably didn’t explain myself regarding the flame. It’s not pressure. The digital indicator showing the...

Hi, hoping for some help. I had my water off at the weekend to replace the magnetic inhibitor and since then I’ve had problems with hot water. Central heating is fine but if I run the hot taps the flame only shows one bar and the water comes through like warm at best. It’s only kicking in...