Our bath is a 'whirlpool' bath bought from Bathstore.com about 5 years ago. Unfortunately the intake got blocked and caused some rather explosive damage to the plastic unions on the pump intake and outlet!
I've managed to dismantle the offending items but need to find spares to replace...
I'm about to lay some B & Q self adhesive vinyl planks and the instructions say that the plywood floor needs sealing first with a 'suitable' sealer. Would a coat of PVA thinned with water(2:1) be suitable, if not what should I use?
Yes I did mean 1.0mm! The lighting circuit is on a 10A switch at the CU. I hear what you say about access to junction boxes, I'm just trying to find the neatest most expeditious way of extending the cable to reach the switch. I had considered just using choc box connectors? Unfortunately...
I'm replacing the ceiling pullcord light switch in a bathroom with a wall switch outside the bathroom door. The re routed cable doesn't reach so am planning to extend it by using a 5A junction box( small size fits to partition batten). I read somewhere that 20A junction boxes should be used...
I ordered the Aurora transformer and it fitted perfectly. Everything now working fine except that there's a noticeable hum from the transformer even when the pull switch is off? I don't remember the old one doing that, it's wired correctly with the neutral connected directly to the transformer...
The lighting transformer in my bathroom mirror has failed and I'm trying to find an identical replacement. It's a circular model fixed by a centre screw and has the following details:
Chi Chien Electronischer Konverter Model ETC-150R
Pri: 230v~50Hz 0.65A
Sek: 11.5v~50-150W
Does anyone...