So the new bearings and seal arrived. I have put them in the outer drum.
The spindle is clear but it is not coming out on the backside of the outer drum
I need to hit the drum hard but I am bit worried I may break or dent the inner drum
I hit the pulley with a hammer with a wooden plank in between
It came off, the inner bearing is totally broken
I have ordered new set of inner and outer bearings, also the bearing seal from zanussi
Thank you both for the reply
Tomorrow morning I will try to take the pulley bolt from the drum. I will try to unscrew if not working I will need to hit it with a wooden plank
Hopefully it would come off
My washing machine is making lot of noise during spin cycle
The drum is shaking so I think it is the bearing so I decided to take the bearing out and replace it along with a seal. I took it apart and struck at taking the bearing. Any advice on how to take the bearing out of the rear drum is...