Recent content by Niblok

Its open vented Hw and ch on one and ch on the other

Hi Gentleman Does anyone have a wiring diagram of a s-plan and a y-plan on one boiler Just be on a job and the system has no pump overrun so banging and clanking. going to fit timer relay but the hole thing needs rewiring its a mess. If it was just s plan or y plan then no problem. But...

Hi all looking at a job, it's a new caravan site 10 16amp hookups what's the best way to run the circuit one ring ,radial or each with its own supply If done as a radial the full length would be 250 meters If each on own supply longest supply would be 125 meter Cheers gents

Cheers sparkwright's just what I had planed to do.Have done it before that way and caught the cable It's just a prattling about was hope someone was going give me a magic wand

Hi all whats the best way to install downlighter cables on first fix Got 16 to fit on ground floor. Don't really trust the person fitting the plaster boards to keep the cables in the same place as I leave them Thank you

House is having a extension built with extra bathroom with electric shower was just going to put shower c/u up but customer wants changing so all on RCD Yes thought it looked commercial

Hi all went to have a look at a c/U change and came across this. Have never seen a C/U like this before can anyone tell me what the top bit is .its a merlin green and is it any different to a standard domestic C/U

Cu

Cheers I like a good simple answer cheers

Can I use 4core swa two run 3 lights independently? So I would use one for neutral and the other 3 as each independent live. Or do I need a neutral for each Try not to laugh to much at pic cheers

My question is more to do with if there was a tester that detected an earth or no earth on lights The guy that had been before me was obviously trying a fast one I found cpc in the switches I just thought some magic pen had been invented

Yep just what I thought how can you test for a cable that's not there

Been to have a look At a job possible rewire. Went to have a look to see if there's a earth to the lights. All painted together tight The owner said there's is no earth she had another electrician to have a look he held up to the pendant what was described to me as a volt pen and he said...

Hi all Does anyone know the minimum distance between the top of a log burner and the register plate And the minimum amount of pipe through the reg plate Have read document J but still lost on these distances Need to keep reg plate low so I can have a cleaning hatch Cheers