Recent content by Nige62

Thanks for the quick reply. All pipes were fixed down when new combi was fitted so it sounds like the second option. Where exactly should this part be fitted, by the supply tap or in the pipes in the loft where the banging is? hopefully not the supply as thanks to the kitchen fitters there...

A mate of ours has got a problem with the cold water pipe banging in the loft when turning off the tap/shower or the cistern stops filling. I was talking to a guy who used to be a plumber and he reckons its caused by very high water pressure and if left could cause damage in the long run. Also...

They are going to be fixed onto an existing wall plate which the ceiling joists are currently fixed on. Will try to find some 16mm through bolts instead of 12mm, if not I will take your advice and use resin and studding Thanks again

Hi I need to fix a 9" x 2" to a wall to mount joist hangers on to take floor joists and was wondering what is the best way of fixing it in place. I was going to use 12mm through bolts at 12" spacing , but my mate thinks these are not good enough. Is he right and if so what should i use...

The lintel is in a supporting wall that the joists will be supported on and is about 5ft 6" wide (size of window). The roof is supported directly above this lintel ( at the eaves) which makes me think it should be strong enough but I just wanted to make sure. Thanks for the reply.

How can I tell if a lintel is strong enough to support a floor. The reason that I ask this is that I want to beef up the current ceiling joists and put down a floor so use an a hobby room. The property is a semi detached chalet style house (2 floors, loft above) but the roof starts at...