Recent content by Niks10

Flooring is wooden...but I guess underneath will be concrete, looking at the floor/wall joint. I have manged to isolate cold pipe circuitery, Hot pipe is too difficult, almost like the needle screw is welded to the valve and when I tried harder the screw started to bend, so I gave up. In...

Right, switched off the boiler, could not isolate any valves as suggested as they are impossible to operate. And boiler still lost from 1.5 bar to almost 1 bar in less than an hour. When boiler is switched on but not in operation i.e. no demand for CH or DHW, the boiler makes some cracking...

Thanks for reply. water is definately not coming out of relief valve. The problem is of boiler loosing pressure (from 1.5 bar to 0 in matters of hours) even when boiler is not in use i.e. no CH or DHW demand. Am I missing something here. Is it not related to expansion vessel or any other...

Newbie here so go easy. My Ideal HC24 boiler is constantly loosing pressure and I have to topup the pressure by opening bypass loop several times a day. Obviously it needs fixing. There is no visible leak in the pipework and pressure relief valve is not discharging anything outside. I...