Recent content by nipperlocko

thanks for the info, I will post back as to how it all goes, I think that you answered quite a lot to me in the first post, ie the danfoss is a single channel and the drayton is a dual channel, I think that the main 4 core cable might have to be replaced with a 5 core to work as a dual channel...

I have a gloworm ultimate 60ff boiler, I`m not an electrician by any means, but have now decided to get a friend out who is, so as I can identify the wires, when I checked out the wiring center, there were three sets of wires coming into it, three 4 core , none of them ordinary black red and...

there are 3 wires, the 3 core from a fused spur, a 4 core and another 3 core, I think the second 3 core possibly goes to the boiler, and the 4 core goes upto a wiring center that is a bit chaotic wiring wise, I will be swapping this for draytons LWC1 wiring center in due course, going into the...

Hi there, could anyone help me a with wiring diagram for the danfoss 103E, not sure how it`s working but was installed when the central heating was installed on a fully pumped system. Listed below is what connections are in place upon it. A fused spur with red. black and earth...