Recent content by Nuggets

  1. N

    No signal on Aerial Cable

    Hi, thanks for the help, back at work so not been able to do anything this week. I got to the point where I think that there must be a problem with the cable. I have connected up a second run ot the one of the bedrooms and that works fine, but the cable down to the lounge just drops the...
  2. N

    No signal on Aerial Cable

    Thanks gents, In the short form example, the cable is being joined with a threaded coupler, 'F' connector either side. Before the connection is made the signal is good, if I test the end of the cable once connected its got no reading. If however, I connect the cable running up from...
  3. N

    Thin gap pointing

    Thanks, but Geofix or red mastik has been tried but that has just dried up and fallen out.
  4. N

    Thin gap pointing

    Anyone know what products can be used or how to re-point thin line brickwork. Normal pointing would obviously just smear the brickwork with mortar and not get much in the gap. This is old engineering brickwork with 5-7mm gap between bricks. I have seen that using something like Geofix has...
  5. N

    No signal on Aerial Cable

    Take the socket out of the equation, if I go up in the loft and test a lead which runs from the aerial I get a meter reading of 50, good signal. If I then connect any length of coax to this lead, I've tried 3 different ones of various makes and types (excluding the cable running downstairs)...
  6. N

    No signal on Aerial Cable

    If I plug signal tester in to socket it gives a reading of 50! If I plug a coax lead in to the socket and then plug the signal tester in to the end of that lead it gives no reading! And don't forget if I go back up to the loft, test the cable from the aerial it gives a reading of 50, if I...
  7. N

    No signal on Aerial Cable

    Hi Sam, The meter is SLx DVB-T Signal Meter, it is 50 dBuV. The cable is the existing cable fitted by the builder, or I can use a length of seemingly anything, as soon as the second connection is made the signal drops. We are using 'F' connectors for all connections. There is a wall...
  8. N

    No signal on Aerial Cable

    I have just fitted a new High Gain TV aerial in the loft which picks up a signal, the meter we have borrowed shows a signal strength of 50. We are in a 5 year old 3 storey town house and the cabling is already installed. I have connected the cable coming up from downstairs directly in to the...
Back
Top