Recent content by odilon

Sorry I know this is an old discussion but I'm having exactly the same conversation now and wondering, which combi boilers will accept pre-heated water and which won't? It looks like Vaillant Ecoplus (which we also have) doesn't allow it, but Worcester (which models??) does. Any other data points?

The wires that used to go to the fan motor look like this (I'm assuming there's a ground, a neutral, and three lives corresponding to the three speeds: The fan motor looks like this: Can anyone advise on which wires need to go where? Thanks!

Thanks Ericmark. The fan still works (or was working before is was detached), so I'm determined to solder them back on. I'll send pictures tomorrow and hopefully it will all be clear.

In the process of disassembling and cleaning a very greasy cooker hood, my father-in-law managed to totally detach the wires from the motor assembly. It looks easy enough to solder them back on to the motor, but I have no idea which wire goes where. Does anyone have a picture or diagram of the...

I have a Grohe "Eurosmart Cosmopolitan" mixer tap which doesn't turn fully to the right (cold). I fear was incorrectly installed, but no way to get the cowboy back so must fix it myself. I took the grub screw out no problem, but for some reason the handle isn't coming off like it should. Is it...

ANSWERS: **The beds were well raked out, and the mix was lime + sharp sand (no cement). I don't have the exact ratio, but the guy who did it knows his stuff. **Sorry, typo, patching and then skim coat over the old plaster, which I assume was lime. ** We installed a railing/barrier. That...

Hi Jimbo, There was a tiny bit of damp which only seemed to appear after the gypsum skim coat went on (presumably on top of existing old lime plaster, which in truth wasn't in great condition after all the wallpaper came off). We assumed it was due to cold walls, and a few days of dehumidifying...

No, we removed all external render - want to go back to the original bricks and lime mortar. Problem is that the guy who did the inside wasn't thinking along the same lines, and put a skin coat of Thistle multi-finish (no lime), and in a few places went back to brick, yes. I've put some pics...

Sorry, but I have a similar problem and wonder if I can ask some advice from some of the Lime Plaster experts on this forum. We recently did a major rehab or our 1890's house, including removing some horrible cement render and replacing a surface layer of sand-cement based mortar with lime...