Recent content by onelivebadger

Sorry its taken so long to reply, iwas waiting for the suppressor to arrive, and it was not that. I have checked the PCB and it has an I.C. TY7 burnt out. The dishwasher is 6 years old would you think it is worth replacing. Hi There Electrical Engineers, I have looked into this further and...

Hi I have a SGS66E02GB/45 Bosch Dishwasher. I started a program and went out for an hour. Came back could smell burning, the dishwasher program lights are all off. Fuse is ok, tried holding down the two reset buttons but still no lights. I have switch off and turned it on again still no...

Hi, I am no longer getting water in the base. That was the problem, it was tripping the flood sensor. I have done a 70 & 50 Degree wash with no trouble. I cannot thank you enough for taking the time to reply, just a simple thing like a loose nut could have cost a fortune. Again Thank You...

Hi I have just removed the water form the base and the DW is now running on 70 degree wash 2-14 minutes. Yesterday i did tighten the large nut on the salt container. Should these be hand tight, or can nip it up just slightly with a wooden spanner. Again Thanks for your replys Kind...

Hi I just pressed 65/40, then pressed the on button C5 came up. Released them and PO came up. Any ideas please. Kind Regards Garahm

Hi Thanks for your reply, Is to easy to unblock the pump, and where would it be situated. Kind Regards Graham

Hi Still not resetting. The matrix is still full and there is a pump running. Thanks for you patience. Kind Regards Graham

Hi I have tried pressing 40 and prewash together as it says in my book but still nothing happens. I have 70, 55-65,50,40,35, and prerinse. Thanks again for you advice Graham

Hi Thanks for the reply the big nut was very lose, and i think that will stop the leak. But now it fills up the matrix but won,t go any further, it will not move on through the programme. I have tried to reset the DW by pressing the 3rd from last and the last together but it will not reset...

Hi I have Bosch Dishwasher EXXCEL when i went to empty the DW in the morning there was a very slight burning smell, and what sounded like a pump still running, and the timer had stopped with 53 minutes left on the cycle. After a couple of days i decided to have a go at repairing it my self. I...

I have a WFF2001 BOSCH WASHING MACHINE, and there is water coming out of the front display panel at the top. I have taken the top off and there is water/rust marks from the soap drawer along to the back of the on/off switch. Also when the machine has done a wash sometimes the soap drawer comes...

Thanks Kevin, All radiators are getting hot, is there anything else i need to do, or keep an eye on. Kind Regards jockwok :D

Sorry Kev got me fosses mixed up. It is a Grundfos UPS 15-50 CLASS F, U949. I don,t no if this will help. :? I have just taken a picture of it, is it the Posidriv screw which looks like it is holding the cover on.

Hi There does not appear to be a bleed valve on the pump, although it is a Danfos Pump

Hi I have just fitted a new TRV, having first drained the water. I have filled the system back up, turned on the CH on and the radiators are all cold. It is an old gravity feed system, i have bleed the radiators, and the bleed valve after the pump. The pump is turning but you cannot hear any...