OneSmallThing's latest activity
-
OOneSmallThing replied to the thread Glue Down LVT - Dip.I’m going to get someone else to come and have a look and see if they can just “fill in” and smooth the dip, then take that (and the...
-
O4mm !!!! That does not meet British standards. Has to be 6mm minimum now. If he can’t use the right plywood bet he can’t screed
-
OOneSmallThing replied to the thread Glue Down LVT - Dip.Chipboard was all level, as was the ply (although used 4mm which he specified). Not sure on whether it was a trowel or pin leveller
-
OWas the chipboard all level ? We tend to find chipboard is level as it’s new. So then we go 6mm ply and feather finish. How did he...
-
OI like to call site meetings. That always got a smile and was good to break the Ice. I called the first site meeting before I started on...
-
OOneSmallThing replied to the thread Glue Down LVT - Dip.The whole house had new chipboard, then ply, then he's taken responsibility for all latex, primer, fitting and adhesive. My hope is...
-
OHard one as it will depend on the sub floor and heights of each room to how level you can get the floor. Did he price to level the...
-
OOneSmallThing replied to the thread Glue Down LVT - Dip.Thanks Wayners, sadly it does seem to be going down an unpleasant route, as they are taking no accountability and blaming everything...
-
OIf you mentioned before and was told it would be fixed but it's not, what is the problem. Seems clear to me.. Fitter needs to sort it...
-
OHi, I've paid to have LVT glue down put down, with the floor fitter putting down latex on top of plywood (on top of chipboard then a...
-
-
OOneSmallThing replied to the thread Moisture in Latex / Screed.Thanks so much - have put a condensing dehumidifier and sealed the two areas off with polythene, and already in a day it’s hugely...
-
OOneSmallThing replied to the thread Moisture in Latex / Screed.Hi Crazydave, I think the tool that the chap I had round used is a protimeter - they grey ones in the photo? But he was referring to the...
-
OOneSmallThing replied to the thread Moisture in Latex / Screed.Thanks opps, really appreciate it. The initial LVT tiles around that damp area were very easy to come up, whereas the ones remaining I’d...
-
OHi, We are doing the final parts of our renovation and unfortunately had a leak in a stud wall due to a faulty join that we think went...
-
-
ODuplicate post - deleted
