opps's latest activity

  • O
    opps reacted to johnny2007's post in the thread Building a stud wall - how hard can it be - help!! with Like Like.
    No, wood screws for wood. Plasterboard screws are only good for plasterboard. And when you fix the plasterboard don't use super long...
  • O
    opps replied to the thread Shut one eye?.
    I never learned how to drive, but as a passenger, when sitting in the front seat of a car, I am often blinded by oncoming vehicles when...
  • O
    opps reacted to Nige F's post in the thread Which dow 785 ? with Thanks Thanks.
    Acetic cure is worse on plastic - neutral cure is the one for plastic/and others(y)
  • O
    opps replied to the thread Heating but no DHW.
    Cheers mate. I will read through the link later. Much appreciated.
  • O
    opps reacted to CountryFan's post in the thread Heating but no DHW with Thanks Thanks.
    Our very own Diynot.com wiki pages
  • O
    opps replied to the thread Manrose fan - Motion sensor ?.
    I get your point. The one upstairs was well behaved. The Icon with the humidistat and PIR either saw dead people or imaginary moisture...
  • O
    opps reacted to flameport's post in the thread Manrose fan - Motion sensor ? with Like Like.
    It would if it's a microwave type. However they also detect things through windows, doors and even some walls, so may not be what you...
  • O
    opps replied to the thread Heating but no DHW.
    Thanks for the heads up. Would that be hot enough to force the hot water to head up to the cold water tank via the "vent" pipe? BTW, can...
  • O
    opps reacted to Madrab's post in the thread Heating but no DHW with Thanks Thanks.
    Be careful, if the HW 2 port is manually latched, there will be no HW temp control. The cylinder stat controls power from the programmer...
  • O
    opps replied to the thread Painting over lacquered paintwork.
    Do you want to remove all of the pink? If yes, it is a case of finding the correct solvent. If it is 1 or 2K spray, or waterbased...
  • O
    opps replied to the thread Heating but no DHW.
    Ahh, that makes sense. Many thanks.
  • O
    opps reacted to oilhead's post in the thread Heating but no DHW with Thanks Thanks.
    Latching the valve will let water pass, but as far as the controls are concerned, the HW will not be on because the switch in the valve...
  • O
    opps reacted to CountryFan's post in the thread Heating but no DHW with Thanks Thanks.
    No but maybe you activated the micro switch briefly (can happen on some valves) and then the pump overrun kicked in, which isn't...
  • O
    opps replied to the thread Blanking Off a Tap Tail.
    Could you branch the cold to provide two feeds? I guess it will provide water regardless of the orientation of the handle- that said I...
  • O
    opps replied to the thread Heating but no DHW.
    I cannot say definitely, but, no, the impression was that the water was only lukewarm. Perhaps the temperature sensor strapped to the...
Show older items
Back
Top