Recent content by ozasco

  1. O

    Loft storage PIR - 5cm between rafter + 10cm between joists

    I've been reading a bit, I think I'd better replaster it with a vapour barrier and let some gap between the new insulation and the exterior felt/tiles so that it ventilates out any condensation, right?
  2. O

    Loft storage PIR - 5cm between rafter + 10cm between joists

    What about bead insulation for the dormer wall? Then I'd just need to drill some smaller holes and apply (does it require an air gun?). I can see that some companies do it with free funding, e.g.: https://dysonenergyservices.co.uk/does-bead-cavity-wall-insulation-work/
  3. O

    Loft storage PIR - 5cm between rafter + 10cm between joists

    So, I guess the easiest/cheapest way to improve my walls is to make a 30x60cm ish hole in the wall and just insert some wool there to both sides (trying to avoid squeezing it if possible), right? Then just replaster/paint the small hole 2 years ago when I bought the house, I had to do a small...
  4. O

    Loft storage PIR - 5cm between rafter + 10cm between joists

    Thanks guys, I will probably just board it, provide ladder/lighting, and move the boiler up (leaving an easily accessible boiler switch on the 1st floor). I will still decide which insulation to use under it (probably: current wool with full 270mm height). Does a telescopic ladder nearby...
  5. O

    Loft storage PIR - 5cm between rafter + 10cm between joists

    @robinbanks which part is inadequate, please? 10cm PIR would be roughly equivalent to 20cm wool. But then I got additional 5cm on the rafters, 15cm total, which is equivalent of 30cm wool. Yes, I forgot to explain that the boiler will be done by a proper professional, thanks for the advice, and...
  6. O

    Loft storage PIR - 5cm between rafter + 10cm between joists

    Hi, I'd like to board my loft and use it for storage and I'd like to move my combi boiler from the bedroom to the loft, to gain some space. I'd like to replace the current loft insulation with PIR to gain some height: 191cm is the highest point from the top of the joists to the rafters. I'd also...
  7. O

    Ripped off and lost, what should I do?

    @cdbe If in wife's name, then wouldn't it still be an eligible asset? I thought it could. Nonetheless, I got your main point, and it makes sense. As well as the other things you said. It was really helpful to hear from someone who experienced a similar situation. I will definitely do DIY as...
  8. O

    Extend dropped kerb on a junction

    Hi, I would like to request my council (Leicester) approval for me to slightly extend the dropped kerb, so that I can park 2 cars side-by-side. However, I live in front of a junction, and Leicester's FAQ says it can be rejected because of this. See images below, I will knock down the front wall...
  9. O

    Ripped off and lost, what should I do?

    Yes, plus at least 1 month of rent that I needed to pay because he was late in the agreement and I had to extend my tenancy agreement a bit. I will definitely send him the pre-action letter suggested, but I think I'd better avoid telling him which evidence I have on my hands. I will also call...
  10. O

    Ripped off and lost, what should I do?

    Thanks all for the support. I think I will ring the council and ask for advice about what to do, without telling them my address. I had so many problems so far. What I've described is just the tip of the iceberg, but thanks for the support. Let me answer a few questions, especially to...
  11. O

    Ripped off and lost, what should I do?

    Context I am new to the UK, I arrived in 2019, I managed to get a mortgage and got the house key in August 2021, in Leicester. The house was built in 1972 and was a bit run down, therefore I hired a builder to change the kitchen/living room layout. We agreed on 50% payment upfront and 50% at...
  12. O

    4 appliances on a single 45a unfused spur

    Thanks, I think this is the most helpful advice from all. You're right and I haven't thought about this before. I will choose option C. From your calculations, it looks like you're considering 245V. I thought the base voltage was 230V in the UK, but 245/246V is what I actually see in my...
  13. O

    4 appliances on a single 45a unfused spur

    I plan to sell my house within 2 or 3 years, and I also get concerns about the house insurance, if anything happens. What other implication will I have for not having the EIC? It was not my fault (9or maybe it was), I recently came to the UK, I wasn't aware of all the rules, the house is what I...
  14. O

    4 appliances on a single 45a unfused spur

    I hear different things from different electricians, but I think you are totally right: we rarely need to access it and it is still possible to switch off the specific breaker. If the regs really do not require the easily accessible switch (maybe they just recommend it), then I will care much...
  15. O

    4 appliances on a single 45a unfused spur

    Sorry all for delaying responses to your so much appreciated feedback, but I have so many issues at the moment (e.g. my wife, 7-year daughter, and I are currently living at this messed up house), that sometimes priorities get messed up. I was thinking slightly different, the solution below...
Back
Top