Recent content by P2AJB

Hi We have a Potterton Statesman oil boiler of some age, it works fine and is serviced regularly. Recently the hot water circuit seems to be behaving strangely. The controls on the programmer have both Radiators and hot water on auto and we are in an "on" period. The boiler fires and runs for a...

Hi Guys, thanks for all your advice. I now have a boiler which has ignites correctly everytime............however it is now producing significant amounts of smoke and soot which was the initial problem and where we started in the November service. Just a thought, these problems started when we...

To be discussed when he returns from his 4 week holiday!!!, you were correct back on post 8, wrong nozzle too much air!!!

Bob, Engineer came yesterday, fitted new nozzle as per the Riello manual Danfoss 1.25 60 S, (removing the Delevan 1.25 60 H fitted by the previous bloke) adjusted pump pressure (which was only slightly low) up to 115psi, the recommended (Baxi) CO2 should have been 12% and was running at 7.2...

Thanks Bob

Thanks Terry will mention it to the man on Tuesday.

Thanks

inveraray

So far local man has fitted a new pump, a new coil/solenoid, a new control box, a new photo electric wand, he checked fuel pressure and air mixture and exhaust with an analyser (no print out left) I have changed the capacitor. Different local man coming on Tuesday hopefully with an analyser...

Hi Changed the capacitor, made no difference at all, thanks for the suggestion anyway.

We live in a fairly remote bit of Scotland and he is a man with a sign written van !!! He changed the parts listed above but never mentioned the capacitor once, as none of them fixed the problem and as he is now away for 4 weeks, I thought I would ask on here, some good suggestions but all apart...

Hi Its white plastic with a white cap value 5uf +/- 5%, i'll get it changed. Thanks

Hi Having looked at the parts diagram on Baxi parts list, if it is part number 3008960 Motor Capacitor, no he certainly didn't change it.

Hi No I'm not sure he did. where is it?

Bottom outlet, flow checked and very full and good, filter checked. So over aired. Strangely it fired from cold this morning with no intervention.