Recent content by paj

had the freezer in the house all night and made no difference,the temp is down to -1 now and i cant hear the compressor working there is no noise comming from that area at all,could it be a thermostat?

its just an upright freezer with one temp setting control ,when i try to set it ,it just reverts back to -5

have been having problems with my whirlpool freezer which is in kept in the garage it will sometimes make a clicking sound and the temp display will start flashing it eventually stops and the temp reads -21 to -23 then sometimes it will be -16.now the temp is -5 and i cannot alter it ,can...

hi i am having trouble programming my sunvic wireless tlx rfp it has 9 programmes on it of which 3 are user defined its one of these which i am trying to programme i press the "p" button and the days of week flash i use up and down arrows untill the numbers 1 to 7 are flashing then press "p"...

hi ,i have an upright whirlpool freezer which i keep in my garage,about aweek ago it started acting strange,it would make a continuous clicking sound and the temperature display will flash with different settings eventually it stop on its own or if i press the temperature settings button and go...

thanks for reply,got one ordered

hi , just in process of replacing my prv on sime 90 plus boiler and when i came to unscrew the nut on top with the copper wire going into it i accidently broke the wire just before the top of the nut, do i have to buy a new pressure dial with the wire attached or is there an alternative?,cheers

thanks for the help

does that mean i should be able to turn down the temp control on my boiler so rads dont get too hot and the sunvic still controls temp in the house

hi, just installed sunvic TLX RFPv wireless thermostat in to my sime 90 plus boiler having a problem setting temperature,should i set the boiler temp to full and then let the thermostat take control or do i disconnect the thermostat in the boiler ? cause at the moment when boiler fires up rads...

ok,think i got it now,thank you for the help :D

not sure if quiet understand,the transmitter comes with a link wire in to set it for 230v so to set it for volt free it says to remove this,if i make it volt free where does the 24v come from for the boiler?

just purchased a sunvic tlx rfpv wireless thermostat and reciever kit from b&Q and planned on firtting it to a sime 90 plus combi boiler but have just found out that the sunvic kit operates at 230v or volt free and my boiler timer controls etc operate at 24v. does this mean the obvious ,that i...