Recent content by patrick187

...got in a local chap who easily fixed it. Removed the heating unit. As the rubber seal had (as expected) bulged under the weight of the drum it was impossible to fit back so I had a new one. Cost £48 call out + £25 part = £73. Damn sight cheaper than Indesit @ £120 or their insuance for £170+!

Managed to get to the sump area underneath. the screw that tightens a metal ring around the rubber sump area was not the easiest thing to get to and undo and do back up. Anyway , got it off and the wire was certainly not there. Put my fingers in as far could reach but could not feel it. Reckon...

Bra wire has got through the drum and the machine nows sounds like 'The Wheel of Fortune'! ! I have checked and the wire has gone completely through. I have removed the back plate and I think there is a heater or sump area which may grant access to the drum to poke around to see if the wire...

I have two questions but because they are both questions about earthing I thought I would only post once. 1) I replaced a broken plastic (face plate) shaver socket with a metalic one . I disconnected the old socket and wired the new one the same way. The unit works fine but I wanted to...