Recent content by Paul winter

To Clarify : the radiator in place is a single panel radiator The reason it’s not being replaced with a same size double in its existing position is because the space is needed to fit an inverter and storage battery . Trust this clarifies .

I want to replace a single radiator that is 1.34 wide and 520 high . The place I want to fix a new unit is 820 wide and floor to ceiling height . What would be the largest radiator I could fit that would give me equal or ideally more output than the existing old one . The position is in a hall...

This is what I have wired . It goes from the timer, to the junction box and then on to the two isolation switches

I have soffit down lights around my bungalow . I was thinking to add a PIR to the circuit, with a power supply cable from the isolation switch then to an existing timer this turns the lights on at any preset time, m however when I look at the wiring to one of the first lamps closest to the...

I have lights around my drive and thinking about putting a small security light in the circuit to not only flood the drive with more light but also to switch on other lights in the circuit . All the lights are LED so the load isn’t that high but what would be the best way to wire a standard...

I have lighting (29) around the perimeter of the house soffit , and also lighting in the garden which highlights the drive entrance also . These are run on a time switch and all are working perfectly well. However, as security is getting more important these days, I wanted to add a PIR to the...

Thank you for the reply ... I know what you mean , and especially as I am English makes the situation worse !! Anyway I plan to ship the lot from UK anyway and this is where I want to put together a plan to get a materials list kind regards paul

I am proposing to put propane central heating into a house in Madeira portugal . I have had local quotes which are horrendous so now proposing to do the majority of the work myself . I am now looking at a design for the property and was enquiring to see if anyone had experience in heating design...