Recent content by paulm34

Yes the T0019 is the service kit with more than just the big diaphram which i got the first time as i changed the sleeve which came in the kit. Or you can just buy the diaphram on its own which is part number 6882. If you are doing it yourself when you take the big white metal boiler cover off...

just an update i have ordered a new fan today but will not arrive till tuesday :? so i decided to remove the fan and check it but it felt not tight at all but the bearings felt noisey when spun. I sprayed the bearings and reasembled it but after a couple of hours problem come back. I did notice...

I had a simliar problem with mine it was the domestic diaphram which i have changed twice know since i have moved into the house. The big rubber diaphram tears slightly as it gets weak over time and lets the water past it instead of pushing the the arm against the switch to fire up the boiler...

Thanks for reply i think your right as the fan can be heard from outside and this morning when i got up the combustion chamber was really hot and then i heard the fan start to turn making a noise untill it spun (noisey) up to speed then the boiler ignited. To the other guys defence it was all...

Hi my combi boiler (Volkera sp80) is not supplying any hot water from the tap or to the radiators. Having changed the domestic diapham a couple of times since i moved in i have had a quick look. I have noticed the combustion front cover to be really hot but with only the pilot light lit (is this...

thanks i might go for a mira then. but i need to look at the inlet postion at my local B&Q store

Hi thanks for replies :D Are mira a good make? are they as good as triton. I would move the pipe if i had not had the bathroom decorated last year. Ties are staying put :wink: Happy new year

Hi :D my old shower seems to playing up so i decided to buy a new one in the sales i bought a triton jade 2 but after reading the instructions have found the inlet pipe to be in the wrong place (at bottom right). I need it to be on the top left (chrome pipe comes from the ceiling to the top...

Hi i had a gas open fire fitted about a year ago by a corgi reg fitter and this winter have started to notice it very cold around the fireplace when the fire is off. like there is a draft blowing into the living room. I also get a draft from under the living room door when sat on the floor. I...

No i have had 3 other engineers look at the problem the said they would change the domestic diaphram first. But none of them turned up after contacting them (must be a plumber thing?? :roll: ) I have spoke to this other guy who is corgi registered. And he told me sounds to be the same thing but...

Hi, our boiler has been playing up and we are now on our 3rd engineer coming to look at it :roll: ( first said get a new boiler (but i've heard that ours is really quite good and don't want to do that if we can help it)and second ordered some parts 2 weeks ago and hasn't contacted us since and...

i did ring him he said he would contact me when the parts are here :roll: He said it must be down to the easter bank holiday (Yer right) I feel that i am tied to him now he has ordered the parts. Should i give him untill the middle of next week and try someone else?

I released the pressure until it was down to nothing. Then i measured pressure in vessel which measured nothing. I then added 1 bar of pressure from dial on foot pump. Now the ch gauge stays around 1 bar untill ch kicks in and rises to about one and a half. As before it used to rise to between...

im located in lincolnshire

Thanks for replies :D No im not going to repair it my self as that would be stupid. I just checked the vessel my self as that was a simple operation to do. I am still wait for parts which was ordered from the last corgi engineer about 2 weeks ago. I could of ordered the parts my self and got...