Recent content by Peav

Thanks alot thats cleared this up. Id rather do it that way than 2 non protected cables from the Cooker point into the hob and oven. Now just gotta find a place to put the FCU :S Thanks again

Yeah the 32A fuse will be getting changed to a 32A or lower mcb as the fuseboard is an old type. Another question if I may ?? Is applying diversity to the layout as i need it considered good practice, ie the oven and hob from the same radial. If so that would drop the Amp rating to around...

By 10mm2 i mean from the terminal point to the 13a switch

Can this be taken from the terminal point that was fitted to accomodate a normal cooker, maybe a 4mm2 cable into a 13A fused unit, with flex to the oven ? Just looked at the oven and there isnt any plug / flex so i have to fit one anyway. Or would the cable have to be 10mm2 same as the main...

Hi there Bit of advice needed as I aint installed a hob and seperate oven before. Anyway, I recently updated the cooker to a 10mm2 radial which is protected by a 32amp fuse. Now the wife has decided after all the work was done that she wants a hob and seperate oven but installed one above...