Recent content by pen7fold

Hi Andy That web site is great,very good pics and info, thanks for you help Chris

Thanks for the reply "herts",they did try for over half an hour with the jetter but to no avail.I have just been out and cleared it again but the rodding eye pipe does sound rock hard like a half brick or something. I think I may have answered my previous question about the design of the outlet...

Hi I have an ongoing problem with my drains blocking.I had a cctv guy try to see what has happened but he was unable to get it down the s bend or rodding eye.I think where the rodding eye connects to the drain has broken and is partially blocking both pipes.I am planning on digging down beside...

Hi I was told 1 plug is for the steam generator and the other for all the other electrics(pump/lights etc). As yet they have not got back to me with loadings but as it had two 13A plugs I was assuming that was the maximum current use. I am checking about the building regs etc. The only cable...

Hi I have be told this unit has 2x 13A plugs attached and was wondering how to supply it.I will be updating the CU to the latest 17th Edition type but not before the bathroom is finished. Could I supply a 13A double socket behind the cubicle fed via a 45A pull cord/switch outside the bathroom...

Thanks Rich for the reply, It is only the dry section above toilet level and the reason for coming indoors is that the soffit is quite deep and at the moment the cast iron one sticks right out and looks an eyesore,the replacement one would be no better. As far as the drainage it was just...

Hi has anyone any tips on fitting a steam shower cabin, I am planning on using a Salamander esp 100 pump fitted in the loft above the hot tank. Cheers

Hi Is it ok to run a soil pipe from outside to inside via the soffit and then put an air valve on it in the loft? I am assuming they still do not make an external air valve. Also if i am changing soil pipes and downpipes but not the underground system do I have to put a soakaway in? Cheers