Recent content by Phil29

Thanks for your help nickso. Much appreciated Have done as you've said and( Fingers crossed) all seems good :D ! Strangely though after bleeding the pump via the screw whilst the boiler was off then on, the same symptoms with the burners shutting down and the CH light flashing happened...

Do i bleed the pump from the big screw in the middle of it? Also do i bleed it with the system on or off and for how long? Thanks again for your help. Just hoping i haven't messed up anything else while changing parts, but i didn't really touch much else on the boiler. Phil.

Thanks for the reply. Yes i loosened the cap on the auto air vent as per manual instructions but no air seemed to come out of it. I'll try your method in the morning to see if it helps things, Thanks. I've since had a go with the central heating out of a bit of frustration and it...

Hi guys, It's taking a fair old while to finally get round to changing the heat exchanger & PRV over but i had some spare time tonight after work and decided to give it a go. After following all your advice, Everything went according to plan and apart from a few little fights trying to get...

Thanks again for you help jonjb. I'll do the test and then proceed with changing the Heat exchanger & PRV if it all checks out. I'll do a search for how to add in the inhibitor you mentioned. Glad you mentioned that as i may not of found out that it needs to be added into the system...

Thanks for the quick reply jonjb. Yes it does require a key to refill the system this however was removed when the pressure was increasing. I will try the test you suggested although with the PRV releasing pressure all the time now it's hard to see what's really going on due to the pressure...

Hi guys, First time posting on the forum and could do with a little help please. We have a Worcester 28CDI combi boiler and over the last few weeks the pressure has been rising by itself to about 3 bar then lowering a little, then back up to 3 bar and so on. I released some pressure...