Recent content by Philgreg

Hi diy thanks for suggestion, good thought ! will try that. cheers

Hi Lunat Checking new expansion vessel pressure was the first thing I did after fitting, it was pressurised correctly Thanks for the thought though, any other ideas? Philgreg.

Glow Worm Xtrafast 3 - 4yrs old. Initially, water loss through PRV, fitted new PRV. Still same problem, checked pressure on boiler expansion vessel, vessel full of water! thought i'd found problem. Fitted new exp vessel in line. Then customer told me that pressure rises from set position of...

Hi Poxi thanks for your suggestion you may have got something there, turned off isolation valve, still water coming through hot side of mixer taps. what's the prob ?? cheers Philgreg

Hi Dave thanks for the quick response. can,t be taps too far away, 1st tap tested was approx 1.5mtrs away from Boiler. DHW at boiler hot water outlet Approx 60 degrees

Potterton 30 HE, 2 weeks old DHW hot at point of discharge at boiler, no fault code appears, Luke warm at all tap outlets. Any Ideas please ???

Checked condensate trap OK. Changed condensate sensor on recoperator & flue sensor at same time. Boiler about 4 years old. Still cutting out and A77 fault code, now stumped ! ??? Is there anybody out there ?