Recent content by PhillipJeans

Sadly this service mode doesn't appear to work. It's either becuase it's still confused or becuase it's the wrong combination of buttons for this model. I've just checked the inlet water valve (replaced a couple of weeks ago) is now broken showing open circuit. What could cause this to fail so...

Thank you. I will definitely try this. I presume the pressure switch is in the 'mother board' as there is a plastic recepticle at the bottom front of the drum with a hose connecting it to what could be a transducer soldered directly on the back of the board. I did check the hose and plastic...

So the original fault has gone into second place and the new fault it 'check drain light' and the drain pump runs continuously. This may have been something to do with me cancelling it mid way through whatever cycle it was stuck on previously, and then dissassembling the water control path valve...

Thanks. The W504 Premier model doesn't have fault codes. Just lights, but on this occasion there are no fault lights.

I can't check now annoyingly. I've just had the front off to ensure that everything was definately clear and see also that the water path selector was working but now when I switch it on, it just keeps draining even though it's empty. I left it for 20 mins to see if it would stop but didn't...

I can't check now annoyingly. I''ve just had the front off to ensure that everything was definately clear and see also that the water path selector was working but now when I switch it on, it just keeps draining even though it's empty. I left it for 20 mins to see if it would stop but didn't...

Hi. I'm stumped. I've done lots of repairs on this washing machine but this one has got me. Miele W504 fills, tumbles, drains then fills then drains. It then stays in this fill-drain cycle forever more There is some clicking from the water path control valve but this was cleaned and lightly...