Recent content by pioner

Hi sambotc I promised to keep you informed on my problem, the fitter came on Friday and fitted a gate valve, I have tried it, and it appears to have made a big difference,( regarding heat going to my radiators ) there are six turns on the valve from fully open to closed, at the...

Hi sambotc, Just to keep you informed sam, first, I must have misunderstood you regarding moving my cylinder, and after feeling very despondent, (pi**ed of in other words) I emailed the engineer who fitted the stove in the first place,( as i've said before is off work at the...

Hi sambotc, I have noted what you have suggested. but I think I will have to settle for second best this time, as I could not, and would not want to move my cylinder to a different position . I would like to thank you, and all, who have made any contributions to my...

Hi norcon good morning norcon, you tell me NOT to make these connections, but No reason why, I really do NOT need any connections at all to my cylinder in the first place, as i've said before, I heat ALL my domestic hot water with the emersion heater, in the cylinder, and...

Hi sambotc sam, Hope you are well, as I have not heard from you for a while, I have again been thinking about how to harness the wasted heat from the domestic side of my stove, If you look at my third picture, (the one with two on) you will see the heating pipes going along...

sambotc Well sam, I went up into the attic again this morning, and turned down the pump to No one, as you recommended, and while I was up there, I took a few more pictures, to try and let you see what is going on, then I lit the stove, and got a really fierce fire going with...

Hi sambotc I could get the flow down in the front lounge in the corner with a plastic duct, But the return, I may as well say, without having a rise is impossible, as I would have to go through the chimney breast to do that, and then it would be impossible to connect anything...

sambotc Sam, Thank you for YOUR picture, I have just taken a picture, of a live radiator,in my rear lounge which has tee's from below the valves going through the wall to feed another radiator in my front lounge, I could put elbow's on the flow and return to kill the radiator in...