Recent content by PKP

Those spikes are worn down so I’ll replace with stronger and larger ones. I like the idea of something like a trellis even if weak -might looker nicer than bits of wood drilled onto the gate!

Thanks. Will try the spikes first

I know but trying to avoid replacing the whole gate.

Hi All We have a side gate (picture attached) that is 1.7 x 0.9m and easy to climb over - had people from some flats at the back using our garden as a thoroughfare and jumping over gate to get to the street ‍♂️. The ground level on the other side is higher so it makes it easier to jump down...

The OP did say 2am-5am! Is this a fault with the programmer?

Thanks for your suggestion and Yes I would leave to an expert...not ready to die yet :D I say it's 10mm as that's what's written on the cert which the EB did. Visually, it is a monster of a cable close up and a bugger to bend. Maybe I can take a picture at the weekend but quite sure we...

It is a 40A Type B Switched MCB.

Thank you! How do I check MCB size?

one more to the left...

Ban, Steve, PoD, Thanks for all your responses. I hope this helps I have the certificate the elec board signed off when the shower was being installed but haven't had any further checks.

I have the main Consumer Unit with RCD protection and the the shower MCB is separate as there weren't any spare blocks. Yes it is a plug-in type of fuse.

Hi there, 10 years ago we had a 10KW shower installed using 10mm cable with a switched 40A MCB (Wylex). The installation was signed off by elec. board. I'm in the process of replacing with 9.8KW Mira Azora. 1) Now, am I ok leaving the 40A fuse with a new 9.8KW shower? (The ratings on new...

Having drawn and stared at the current wiring for days ( :shock: ) I think that actually makes sense to me :) It doesn't have the 3 amp fuse anywhere so that will be my first port of call! Thank you guys for taking the time to give advice I really appreciate it.

Actually something just struck me (lost a couple of brain cells last night!!) ...I can currently switch my CH and HW independently but the EP2000 doesn't allow me to set On/Off times independently....sorry I didn't clarify this earlier. I am assuming then my system is ok and does just need a...

:( well thanks for that piece of vital info.