Recent content by pkwonder

Hello, Thank you for your email and interest in our product. I have quoted for the required items below: 2 x Premium Oak 4m x 620 x 40mm = £300.00 (2 x £150.00) 2 x Oak 3m x 80 x 18mm upstands = £50.00 (2 x £25.00) Delivery to most UK mainland post codes = £45.00 Total (inc. VAT and...

You'd have thought so, but no... I would love to be in a position to be able to say the £50.00 would be acceptable but my authority only goes to the amount of £25.00 for the worktop. It is unfortunate that you have attempted to rectify the problem yourself as our policy is to exchange...

In the above pic, only the piece on left is curved. I emailed the supplier on Thursday - Hi, Worktops arrived promptly and undamaged. Thank you. However, one of the worktops has cupped, the other other is fine...? Regards, David. Again on Friday - Hi, Can you...

Still no word back from the supplier. Going to try and fit and clamp it down. I've cut the cupped length to size. Only to discover that it's curved at one end... Arrgghh! Am I being overly fussy....?

A couple of millimeters... Would screwing to the units pull it down? Flip it and sand it with a belt sander I don't have? No word from the supplier as yet...

I imagine there has to be some leeway on a natural material... Just took delivery of two, four metre lengths of oak butchers block worktop. One is fine. The other, cupped the entire length. Across it's 620mm width, it's two or three mill out. Is that acceptable? I'm still waiting to...

Hmm. If I were to cut the aperture with a decent overhang, drip, and drainer grooves.....would several coats of Tung oil not be sufficient?

Square edged sink like this - 40mm thick Oak Butcher's Block worktop with no overhang/drip groove. Bad idea?

New gas valve fitted. Fires up, burns for a few minutes, then extinguishes. Humming noise still present. Dug this out... Unsure if it's the source of the humming, although turning the speed dial on the side alters the pitch of the hum. I know for sure the system needs flushing...

So yeah, boiler stopped today. Pilot light's on, but won't fire up. Making a humming noise, like an electric motor that's reluctant to spin. So I opens her up - I see no fan, no pump, WTF? Last house only ever had a combi. Now I've been blessed with this ancient warrior...