Recent content by poshram

don't take my advice as gospel, but it sounds like your whole system is the same as mine. where does the grey(3) and black (4) wires go to? do they control the power to turn on your CH and HW via your 2/3 motorised values? ideally you need to work out your current wiring in terms of how you get...

Does any one have any ideas if adding another Hive Active Heating™ thermostat and receiver to my existing hub means that the thermostat and receiver have to be installed as a pair unit (meaning each other knows about its MAC or identity code?) or I have to buy the official hive multizone kit? I...

i did notice your location...........my best bud here in Pboro (hence why I am called poshram) is a forest fan...so I only get grumpy when we play and loose .

Hi Stem glad to say that I've easily managed to get it fitted, from your help (many, many tks) only issue I had was that I had to fix the connect off the wall as my existing cables would not fix with it needing to be fixed flush to the wall. tested my HW/CH, and it works as expected with on...

i have ran windows 7/8 and now 10. both far for performance and ease windows 10 wins hands down IMHO. Free upgrade runs out tomorrow so you need to upgrade be quick!

hi Stem- many tks for replying back to me! the danfoss is a Danfoss Randall FP715SI -but your right N /L is on the left and T3 is for HW (blue) and T4 is for CH (Brown) Ref switching contacts for the connect, ok I understand this bit tks! Ref the salus room temp wiring. this has 4 wires...

Don't use the HP wifi driver. Go direct to the wifi chipset manufactor and update the driver from here.

you never said what type of wireless router you were using (sky/VM/BT etc) if you have a smartphone- download a wifi analyser that can help troubleshoot issues with signal strength and channels used for your router. if you dont have issues with a smart phone wifi then it must be a driver issue...

what email client are you using? some offer better features than other, but in the end your will always get some spam through on any email client (gmail/outlook/hotmail etc)

if your daughter is a student she can get a 4 year office 365 license for £60...

did you look at this url? for certain you will need to use a windows 7 or even XP driver if the scanner is old. http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Need-driver-for-HP-Scanjet-5400c-scanner-using-Windows-7/td-p/172462

did you fix this issue? I guess you would need either the recovery boot partition to be created on your hard disk OR you need the Windows XP OEM disk to boot off to repair the file you are missing!

if you build out windows 7 onto a SDD from one laptop, then transfer the SDD into another laptop (in your case from a ThinkPad X200t to a Lenovo S20 ) for certain the hardware/drivers you build it out on the X200T will be different! therefore you may have issues once you install the SDD into...

I bought my UFH from this company in doncaster that a mate who runs his own commercial building company recommended to me. the fitter I used was very impressed with the quality and ease to fit it, and not had any issues with it so far! http://www.underfloorheating1.co.uk/ HTH

hello folks. can anyone help me in understand how I get a Scottish power connect (climote) wired in? I currently have a danfloss timer that has 2 zones (heating and water) that is wired as a S plan, via a wireless room stat (that is wired via a junction box) with a ideal logic+system boiler...