Recent content by pto

Is this any this anything to worry about. Rem wr rd. And copy site com4. Thanks

it not the pcb thats a fact i think it may be the mains filter just unplug it off the terminal block

Hi GalaxyGuy, I pretty much knew no harvesting took place but when presented with that strange set of circumstances the mind goes off on one! Sorry for the insinuation. Thanks for taking the time to give some thoughts on this one. We use a combo of Gx remote, the rfid fob, your remote or...

Hi there, Could any of you possibly help shed some light on what has happened here? I have a Flex 20 V3 with the network module, and all my user pins are (were) custom bar the engineer pin which was default. I have the network module open to the outside world via my router so that I can log...

no and t1

Brilliant, that fixed the problem straight off. Thanks very much! That's one for Honeywell to put in their manuals :D

Hi there, Could anyone help me please, I am trying to enable Simple Set on my Flex 20 V3 panel, I go through the manual, go to 51, 80, swap 0 - Disabled to 1 - Enabled however when I press enter I get a quick prompt "Error - Existing pin wrong length" (words to that effect) I have a Flex 100...

I bet the pump is blocked common Jack

it's working if it was't you would get a error code up Jack

that stat is not your problem the oven is ether overheating main stat u.s. or the cooling fan is't working. off what you saye the overheat stat is working correct Jack

why is it a **** take do you want a free callout its ok as long as it costs you nothing what the hell does £40 get you these days Jack

Hi you have got a prob with one of the motor leads it will be one of the two end ones that go to the taco on the back of the motor Jack

Hi new carbons in the motor will fix that Jack

Hi take the top off and the little back and there you go easy as Jack