Recent content by pveeuk

thanks @RandomGrinch, @CBW... it worked. two zones and hw worked (y). u guys are awesome :love:

thanks so much RandomGrinch,where can I send a few bottles of beer (y) :love: the diagram, really helpful for my wk end project. I will update here how it goes. thanks to Chris too

thanks Chris for the correction, its unvented heating (ie not with an overhead cold water tank isntit ?, mistook expansion vessel on the hotwater cylinder) sorry new to the heating systems. still learning how it works - thought I give it a go if its not too complex with the help of you guys +...

thnaks for the reply CBW, Being a 2 story house it should be fairly simple. You would need to mount the Wiser receiver near the wiring Center for best results. Do you know if there’s a single timer too? sorry "single timer" I am not familiar with the entire boiler set up in my new house -...

thanks Chris, yes I got Wiser kit 3 without checking the wiring because my previous owner installed the heating system with two temp controls - one upstairs and down dowstairs - thought its a multizone set up. so you reckon best to get the kit2 to avoid rewiring ? I guess its working like a...

thanks Chris for the quick reply.. for a start I havent done any wiring at all.. just removed the existing Danfoss controller from the backplate and put the wiser controller and then set up the app where in the app - selected gas boiler and the boiler type is standard"

thanks eric, chris for the reply Chris this is the wiring diagram and the image of the boiler set up

Hi All, I have a vented heating system where a Danfoss thermostat controller is used to schedule the central heating and hot water. I have two zones—upstairs and downstairs—which I turned to the maximum setting of 30°C so that they are always on. When I opened the Danfoss controller, I saw...