RandomGrinch's latest activity

  • R
    RandomGrinch replied to the thread Bi folds Gap.
    I think the white protection film on the frame will tend to exaggerate the gap. Take the film off and you may get a better impression. I...
  • R
    What about cladding the top and just render the bottom like this: Easy enough to loose those plates behind the timber underneath.
  • R
    RandomGrinch replied to the thread Cooling fan.
    Well done, good try! :)
  • R
    RandomGrinch reacted to dan2002's post in the thread Cooling fan with Like Like.
    Oh well. I cleaned it and did my best and it seemed to improve it.
  • R
    RandomGrinch replied to the thread Cooling fan.
    I'm afraid that's not the front bearing. You want to try here:
    • Screenshot_20220812-165547_Chrome.jpg
  • R
    RandomGrinch reacted to Justin Passing's post in the thread Cooling fan with Like Like.
    Can't see a black part! First I'd have squirted WD40 onto the shaft and let it run towards the bearing under gravity - sometimes you get...
  • R
    RandomGrinch replied to the thread Cooling fan.
    What he said! :)
  • R
    RandomGrinch replied to the thread Cooling fan.
    That's really not dusty at all compared to the ones I deal with. Just give the blades a wipe when you take them out.
  • R
    RandomGrinch replied to the thread Cooling fan.
    Take the front guard off (swivel the tabs, there may also be a small screw), take the blades off (unscrew the blue end cap clockwise!)...
  • R
    RandomGrinch replied to the thread Cooling fan.
    If you want to, but there's nothing wrong with having a go at fixing what you have, then you have two fans! ;) ...and if you really want...
  • R
    RandomGrinch replied to the thread Cooling fan.
    Fan motors can start to seize when they haven't been used for a while. The grease can dry up and dust can get into bearings. If you can...
  • R
    From what I can see, (zooming in a lot on the photo), it looks to me as if you may have square vinyl floor tiles? Is it possible to...
    • Screenshot_20220812-153848_Chrome.jpg
  • R
    RandomGrinch reacted to diy_fun_uk's post in the thread I hate MS!! with Like Like.
    What annoys me with all this sort of stuff (including things like completing a purchase on Amazon and them pushing Prime) is whilst...
  • R
    RandomGrinch replied to the thread I hate MS!!.
    Similar here, my mum was convinced she had to get a new laptop because of the pop-up incompatibility message. It almost seems like a...
  • R
    RandomGrinch reacted to IT Minion's post in the thread New design Air conditioning unit with Thanks Thanks.
    I'm not convinced that the calculation is correct there. It uses the rooms starting and ending temperature as the two values for the...
Top