Recent content by ravi_narang

thanks for this Dave, I hav just disconnected the filing loop and it is leaking water, despite the tap being in the off position. Is this causing the pressure to rise excessively?...the "normal" pressure seems to be around 1.7? again,any advice appreciated.. thanks

The filling loop is definately in the off position, but the pressure still seems to keep rising... any other ideas on what might be wrong are very much appreciated

Hi, I have recently had a Glow-worm 30sxi system boiler installed, at first the pressure decreased most weeks and required increasing using a plastic tap next to the boiler, the installer recommended we keep it around 1.5 and dont let it go below 0.9. We now seem to have the reverse...

Thanks for the reply Dave. I am pretty sure the Honeywell value is brand new so I am concluding that maybe the wiring the wrong. Is there anything obvious I can check tsee if this is the case? Thanks

Hi, We have recently had a GlowWorm 30 sxi installed, I have the following concern. The programmer has both hot water and heating set to off. However,the boiler seems to be on fairly constantly producing hot water only. The immersion switch is set to off. There is a termostat on the...