Here is how is how i wired the Hive single channel receiver to a Vaillant ecotec 825 combi boiler,
The L/N/E from the fused spur will already be wired in at the X1 terminal to power the boiler
wiring instructions for the hive receiver to the boiler
I used a 5 core cable bought from Screwfix
–...
I had a sparky friend come over and help, instructions below for the single channel hive receiver
The L/N/E from the fused spur will already be wired in at the X1 terminal to power the boiler
wiring instructions for the hive receiver to the boiler
I used a 5 core cable bought from Screwfix
–...
Hi max_zammon,
Just for others trying to install the hive to a new ecotec plus 825. or new vaillant wiring boards
Follow the steps on this post. worked for me
//www.diynot.com/diy/threads/hive-2-on-vaillant-ecotec-plus-831.456243/
Did exactly as this drawing from Bomberbaz and worked perfectly. wired in the earth as well to the hive receiver.
Was quite tricky getting 3 wires in to the Live, managed to get it done.
Connection for the receiver to the hub took a few turns but got there in the end. Was flashing red on the...