Recent content by Raylekkyguy

Hi Again, I found the solution, I came to the conclusion that the pcb needs a stable mains voltage, inverter voltage varies depending on load, my solution was to connect the boiler to mains to only power the tonics Pcb, I then connected the 240 volt pump output to a relay, so when the central...

It worked for me. I tried every option and this was the solution.Total cost 17 quid

Hi Norseman, my baxi boiler is fed from a 300 watt Bestec inverter and the inverter also powers the lights and wc fans, the CH doesn't even dim the lights on start up. Putting it in a more simplistic way is to use the 12 volt Ac output of the transformer and adding it to the 230 volts input from...

Hi AlI, nebie on the site and trying to help, I had the same issue and it took me 12 months to rethink the problem as to why the baxi boiler would not fire up on the inverter... It worked perfectly on grid and 3 inverters later I came to the conclusion it was the inverters did not give enough...